Little To No Heat From A Central Heating System
Does your heater run all day when it is cold inside your home because you always hope it will release more heat? No matter how long you run the heater, you will not receive more heat unless repairs are made. In most cases, a central heater that does not release enough heat has a problematic furnace that needs attention. However, there are several other parts of the heating system that could be causing problems as well. If you are tired of feeling uncomfortable and cold inside your home, hire a contractor to assess your heating system and make repairs.
Furnace Problems Might Be Present
The types of furnace problems that can develop can vary depending on the type of furnace you have. For example, if you have an electric furnace, an electrical repair might be needed for the heater to start releasing heat. If you have a gas furnace, the pilot might be out or there is no gas being routed to the furnace. You should never attempt repairing a gas furnace on your own because making one wrong move can cause an explosion. Your furnace should be assessed and repaired by a professional whether it be one that is electric or gas.
An Accumulation of Dirt in the System
Dirt might not seem as though it can prevent a central heater from producing heat, but it can cause major problems. One important aspect of a central heating system is the filter, and dirt can cause the filter to stop functioning. For example, air flows through the filter before going through vents, but might not make it through if there is too much dirt. Something as simple as getting the filter cleaned or replaced can lead to more heat flowing throughout your home. Dirty air ducts can also decrease the amount of heat coming from the vents.
The Thermostat is the Culprit of the Problem
If a central heater begins releasing the same level of heat, the thermostat might be to blame. For instance, if you do not notice a change in the level of heat no matter which temperature is set on the thermostat, it might be due to the needle not working as it should. A thermostat could also become problematic when there is an electrical problem, such as a short in the wires. You might need to hire a contractor to not only install a new thermostat but to make other system repairs as well.
Contact a local heating contractor to learn more.